1 litre of Agip SAE 7.5W fork oil. Eni Fork Oil 7.5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required.

Eni Fork Oil 5W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 5W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 5W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

A beautiful black stainless steel silencer with bright end cap. Made by Agostini of Mandello del Lario. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.7kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

Supplied with removable baffle. The baffle is easily removed by taking off the retaining circlip in the rear of the silencer. To achieve maximum performance gains also fit link pipe EXA85199 and performance air filter SIA10433
Agostinis are in the process of getting these homologated.

 This part is available by special order, request a quote

Performance 2-1 connecting pipe or H pipe. This mid pipe is less than half the weight of the original pipe and will make a significant improvement to both the exhaust note and performance of your V85 TT when combined with a performance silencer and air filter SIA10433

Gaskets not required with this crossover, the Y piece fits direct. A performance exhaust crossover for your V85 TT

 This part is available by special order, request a quote

A beautiful brushed stainless finish silencer made by Agostini of Mandello del Lario. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.7kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

Supplied with removable baffle. The baffle is easily removed by taking off the retaining circlip in the rear of the silencer. To achieve maximum performance gains also fit link pipe EXA85199 and performance air filter SIA10433
Agostinis are in the process of getting these homologated.

 This part is available by special order, request a quote

Air filter, flat paper cartridge type

See SIA10433 for a reusable K & N air filter

 More than 5 in stock

AP8104329

Ninety degree angle extender for schrader tyre valves. Improves access to valve for tyre pressure checking

Suitable for 130/70 x 17, 140/70 x 17, 130/80 x 70, 120/90 x 17 tyres

 4 in stock

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÜV Rheinland.
  See BRA41652 for bleed valve cover

   This part is due back in stock soon, call 01484 841395 to reserve yours

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Brilliant chrome, aluminium and metal polish.

Make your Guzzi gleam.

 1 in stock

Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems

These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt

 More than 5 in stock

Also fits Benelli 250 TS

Pair of black knurled alloy bar ends, fixes via included bolt

Only for models with standard steel handlebars, not for aluminium handlebars

 This part is available by special order, request a quote